281-565-8991
FITIPICI Transfer Case Cable Shift Linkage Upgrade Heavy Duty Compatible with Jeep Wrangler TJ 1997-2006
FITIPICI Transfer Case Cable Shift Linkage Upgrade Heavy Duty Compatible with Jeep Wrangler TJ 1997-2006
Product Details
Click to read more...Introducing our top-of-the-line product, the Struts Shocks from OCPTY! Designed specifically for Jeep enthusiasts, this rear shock absorber set is a perfect fit for 1997-2006 Jeep TJ and Wrangler models.
Attention to detail is paramount to us, which is why we want to clarify a few important points. Firstly, our shocks sets kits do not include strut mount, coil spring, rubber buffer, or bushings. Please keep this in mind while making your purchase. Secondly, we highly recommend checking our compatibility chart to ensure a perfect fit for your vehicle.
Installation is a breeze with our Struts Shocks. They are a direct replacement for your original parts, and the buckle holes are consistent with the original mounting points. No modification is required. However, we do recommend professional installation to ensure optimal performance and safety.
Now let’s dive into the key features that make our Struts Shocks stand out from the competition. Firstly, they are 100% brand new, ensuring unrivaled quality and reliability. Secondly, our shocks guarantee exceptional stability and a comfortable driving experience, allowing you to conquer any terrain with ease. Moreover, they boast a longer service life compared to standard shock absorbers.
One crucial advantage of our Struts Shocks is their ability to prevent oil leakage and eliminate any abnormal noise that may occur while driving. We understand the importance of a smooth and quiet ride, and our shocks deliver these benefits flawlessly.
So why compromise when it comes to the performance and safety of your Jeep? Upgrade to OCPTY’s Rear Shock Absorbers for your 1997-2006 Jeep TJ and Wrangler. Experience the ultimate combination of reliability, comfort, and longevity. Drive confidently knowing that our Struts Shocks have your back, no matter the road ahead. Order your set today and take your Jeep adventures to new heights!
More about our:
- Brand: FITIPICI
- Color:
- Exterior Finish:
- Material:
- Item Dimensions LxWxH:
FITIPICI Transfer Case Cable Shift Linkage Upgrade Heavy Duty Compatible with Jeep Wrangler TJ 1997-2006
Installation: 1. From inside of the vehicle pull up the carpet and remove the four 10mm bolts that hold the stock shifter bushing mount 2. Support the transmission underneath the vehicle by using a transmission jack or a jack stand and a piece of wood under the pan 3. Remove the factory skid plate cross member and set to the side 4. Remove old shift linkage at shifter by using a body panel removal tool. Maybe you need to cut the stock plastic bushing on the side that sticks out (do not remove the bushing) 5. Remove the two 9/16 nuts from the transfer case that hold on the stock bracket 6. Remove the nut holding the stock shifter arm to the transfer case and save the nut and washer. You may need to be prying lightly to remove the stock shifter am 7. After the old linkage is removed replace the upper nut on the transfer case as your new bracket will bolt to the bottom of the two studs for the transfer case 8. Install your new shifter arm to the transfer case by reusing the stock nut and washer 9. Install the new body mounted bracket using the 4% SS bolts from inside of the vehicle. You may need to get all 4 bolts threads started before tightening any of them down fully because of the shape of the body 10. Install the transfer case bracket on the bottom of two studs of the transfer case and make sure all your bolts are tightening before installing the cable 11. Install the shifter cable on the bracket. Please use the quick release pins provided to connect the cable to the shifter and the transfer case shifter arm 12. Finally please adjust the cable length until all gears engage correctly. If you can not figure it out, we suggest you search on U Tube Product description The transfer cable linkage shift is installed using U-clamps at both ends of the cable, aligning the push/pull force directly with the cable, providing stronger double shear force Fitment Compatible with Jeep Wrangler TJ 1997-2006,Only fits the 231 transfer case, will not fit a Rubicon note The product does not include a manual Only fits the 231 transfer case, will not fit a Rubicon Product advantages Made of high-quality materials Durable and durable, with longer service life Direct installation without complex operating steps Robust and stable performance